english BIOS Hilfe - Fragen und Antworten

zurück zur BIOS-Hilfe...

bios geht nicht mehr
28.Okt 2013 17:02
hyaene3 schreibt:
Hey Leute......
hab ein MS-7176 (VER.2A1)..(MSI 945P/G Neo2)
bios ging ins setup um einstellungen vor zunehmen ....
nach neuinst. von win xp pro und erstem neustart konnte ich das win setup nicht fertig installieren(orinal xp pro)....jetzt geht nix mehr,
komme nicht mehr ins bios setup....
entweder kommt ein fabrikats bildschirm....oder wenn ich entf. drücke, gehts nur ein schritt weiter...
und zwar folgendes:
MSI 945P/G Neo2 A7176IMS V3.0BIOS Date: 11/17/05 09:56:44
Intel(R) Pentium(R) 4 CPU 3.00GHz , Speed: 200x15=3000 Mhz
Hyper Threading enabled

Press F11 for Boot Menu
The MCH is operating with DDR2 667/cl5 in Dual-Channel Interleaved Mode
initializing usb controllers .. done.
3200MB ok

auto detecting pri master..IDe Hard disk
autodetecting 3rd Master.. atapi cdrom
autodetecting 3rd Slave... atapi cdrom
Pri Master: WDC WD1600ys-01shb1 20.06C06
Ultrea DMA Mode-5, S.M.A.R.T. Capable and status ok
drücke ich F11 .....kommt Bootselection popup menu has beeen selected...

Tja das wars ...mehr passiert nicht!!!!
Hilfe :angry: :angry:
bios geht nicht mehr
28.Okt 2013 22:40
biosflash antwortet:
Wurde die Hardware verändert?
CMOS-Reset gemacht? ==> http://www.biosflash.de/bios-cmos-reset.htm

zurück zur BIOS-Hilfe...