BIOS Help - questions and answers

SwooshyCueb writes:
English:
I have a Toshiba Satellite X205-S9349 with a corrupt BIOS. When I hit the power button, the fan is the only thing that comes on. I have tried to recover by using the boot block (Fn+B), but it doesn't work. There is no jumper (switch) on the motherboard. I have taken it apart and I cannot locate the BIOS chip. All of the chips on the board are soldered directly to it. What do I need to do?
Here's what I know:
The motherboard is an ISRAA LA-3441P Revision 2A
All Toshiba Satellite X205 and P205 use the same BIOS
The chipset is Intel PM965
The BIOS is most likely on EEPROM
The device is EFI compliant
The CMOS battery and its holder are missing
The BIOS contains the following strings:
Intel Santa Rosa CRB.TC3 Reference BIOS
VERSION.MAK -r1.20
PHOENIX CSS 2006 SP3B
PX020K452C86
DynaBookPX200_k45/2C8

Please help!

Ich habe ein Toshiba Satellite X205-S9349 mit einem korrupten BIOS. Wenn ich die Power-Taste drücken, wird der Lüfter das einzige, was leuchtet. Ich habe versucht, mit Hilfe der Boot-Block (Fn + B) zu erholen, aber es funktioniert nicht. Es gibt keine Jumper (Schalter) auf dem Motherboard. Ich habe es auseinander genommen und ich kann nicht finden, die BIOS-Chip. Alle Chips auf dem Board direkt mit diesem verlötet. Was muss ich tun?
Hier ist, was ich weiß:
Das Motherboard ist ein Israa LA-2A 3441P Revision
Alle Toshiba Satellite X205 und P205 die gleichen BIOS
Der Chipsatz ist Intel PM965
Das BIOS ist höchstwahrscheinlich auf EEPROM
Das Gerät ist konform EFI
Die CMOS-Batterie und deren Halter fehlen
Das BIOS enthält die folgende Zeichenfolgen enthalten:
Intel Santa Rosa CRB.TC3 Referenz BIOS
VERSION.MAK-R1.20
PHOENIX CSS 2006 SP3B
PX020K452C86
DynaBookPX200_k45/2C8

Bitte helfen Sie!

biosflash replies:
Hallo,

das EEPROM könnte so aussehen: http://www.flazh.de/images/winbond25x80vaiz.png
Grösse: 9x6mm, Pins: 8 (2x4)
Am besten du entlötest den Chip und lässt ihn neu programmieren.

SwooshyCueb replies:
Wie würde ich die EFI-Schnittstelle?

Vielen Dank im Voraus

biosflash replies:
I think you have to unsolder your bios chip for reprogramming.

SwooshyCueb replies:
I'm trying to avoid using my soldering iron if at all possible. I'm not that good at soldering, but if I really have to I can. Is there some way I can reprogram the chip while it's still on the board? I have no problem with attaching wires to the chip while it's still on the board. But just so you know, I don't know what hardware I would need.

biosflash replies:
It should be easier to desolder the chip instead of attaching several wires to the chip ;)

SwooshyCueb replies:
I still can't figure out which chip it is. I've uploaded some pics I took of the board. Maybe you can help me figure out which one it is.

http://www.fileden.com/files/2010/6/17/2890088//DSCN0550.JPG
http://www.fileden.com/files/2010/6/17/2890088//DSCN0551.JPG
http://www.fileden.com/files/2010/6/17/2890088//DSCN0552.JPG
http://www.fileden.com/files/2010/6/17/2890088//DSCN0553.JPG
http://www.fileden.com/files/2010/6/17/2890088//DSCN0554.JPG
http://www.fileden.com/files/2010/6/17/2890088//DSCN0555.JPG

biosflash replies:
Sorry, but your pics are too bad. Send better pics to my email address (see imprint/impressum)!

Or try to find the any 2x4 (8) pins chips which have a "25" inside their type name. e.g. "25X80VAIZ"
Or try to find the any 2x7+2x9 (32) pins chips which have a "29", "39", "49" inside their type name. e.g. "W39V040BPZ"

SwooshyCueb replies:
Here's some more pics. Is it any of these chips?
http://www.fileden.com/files/2010/6/17/2890088//out_00.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_01.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_02.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_03.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_04.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_05.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_06.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_07.jpg
http://www.fileden.com/files/2010/6/17/2890088//out_08.jpg

The reason I don't want to do any soldering is because I have ruined many chips with my shaky hands. Would it be possible for me to ship the entire board?

There's another one that I don't have pics of, it says
MHPCC0649
●NS892402
It's much taller than the other chips.

biosflash replies:
Sorry, but i can't detect any chip which comes into question, and we only accept single chips and not the whole mainboard. Maybe you should use google to find the right chip by inserting the chip type name. If the chip type is a "Flash Eeprom" or "Serial Eeprom", you are on the right way.

ASROCK AM1H-ITX ASUS SABERTOOTH P67 ASUS P8P67 ZOTAC ZBOX ID88 ASUS A8V DELUXE ASROCK Z77 PRO4 ACER ASPIRE M3200 ASUS SABERTOOTH 990FX R2.0 ASUS SABERTOOTH X79 ASUS M5A99X EVO BIOSTAR B75MU3B VER. 6.X ASUS CUR-DLS ASROCK Z77 EXTREME4 ASUS M5A78L-M LE ASUS P8Z68-V PRO ASROCK N68-GS4 FX R2.0 ASROCK Z87 PRO4 ASUS P5W DH DELUXE ASROCK Z97 EXTREME6 ASUS P8H77-V ASUS M5A78L-M/USB3 ASUS P5Q-E MSI K8NGM2-FID ACER ASPIRE M5100 ASROCK Z68 PRO3 ASROCK Z77 EXTREME6 ASUS P7P55-M ASUS P7P55-M/TPM ASUS M5A97 EVO R2.0 ASUS STRIKER EXTREME